Your data. Your dial.

Build your turret tape.

Enter your rifle and turret data, confirm the watermarked sizing, height, and layout preview, then download a clean PDF sized for your dial.

Step 1 of 4

Start with your rifle and load.

Rifle and cartridge

Rifle, caliber, and ammo are labels printed on the tape. Spell them however you like.

Projectile data

Velocity is the number to get right: a chronograph reading beats the box number. Unsure about BC or drag models? The inputs guide explains every field.

Your transonic range Calculating…

Heads up: past the transonic point, drop predictions from a standard drag model can be unreliable or inaccurate. Trim them, or keep them and confirm by live fire before you trust them.

Dial behavior

Pick the exact scope or sight configuration when it is listed, or enter the values from your dial. You can measure the turret diameter now or estimate it with the printable gauge in your sample preview. The printed preview also lets you compare labeled tape heights against the smooth band.

Published click specs only. Confirm the exact model and turret markings. Physical fit is not verified yet.

Atmospherics

Open section

Fine to skip at shorter ranges: the defaults are standard sea level. For long dials, set the altitude and temperature where you actually shoot.

Customize appearance

Open section
Start from a preset

Hunting reference marks

Flag ranges below your selected energy or impact-velocity minimum.

More custom color options are available on desktop. Black and White are always available in the quick colors below.

Overall look and layout

One full turret turn, printed once below the yardage rows. The reference row is included in your selected tape height: 1.8 mm at Small, 2.7 mm at Medium, and 3.6 mm at Large. Minimum heights at Small: 4 mm for 1 wrap, 5 mm for 2 wraps, and 6 mm for 3 wraps. Each size up needs 1 mm more.

100-yard marks
50-yard marks

Hide the 150, 250, 350… number labels without removing their tick marks.

From your data to a wrapped dial.

Open section
  1. 1

    Enter your setup

    Rifle, cartridge, bullet, zero, turret specs, and the conditions you shoot in.

  2. 2

    Make it yours

    Open Customize appearance to set your tick colors, background, wrap count, and tape height, switch yards/meters, or start from a Classic, Dark, or Lime preset. Optional, but it's there if you want the look dialed in.

  3. 3

    Preview free

    A watermarked sample rebuilds as you adjust. Print it at 100% to compare labeled tape heights. If you do not know your turret diameter, use its sizing gauge to estimate it, then regenerate the sample and tune the fit. No charge to look.

  4. 4

    Pay, print, wrap

    Download a clean PDF with 10 matching cutout tapes for your custom setup and get the PDF in your inbox. Print at 100% scale, cut, and wrap your dial. Paper picks and printer settings are in Printing & applying below.

Already bought a tape? You can update velocity, zero range, conditions, and appearance for free from your account. For a tape built from your own turret corrections, replace the supplied data when the marks change. DialWRX can interpolate missing marks between supplied values. Velocity and the saved conditions are used for calculated hunting energy and impact-velocity references. They do not move any tape marks.

Builder support

Report a problem

Tell me what stopped working. The report includes your builder step, selected units, validation status, and basic browser details. Your pasted table and ballistics values are not attached. Reports from a paid tape editor are linked to that order.