Free rifle calculator

Hunting energy calculator.

Enter your bullet weight, BC, muzzle velocity, and species. See the last calculated distance meeting your chosen recommended minimum.

Your load

Use the exact projectile and measured velocity from your rifle.

Match G1 or G7 to the coefficient published for your bullet. They are not interchangeable.

Conditions and recommended minimums

Defaults: sea level, 65 F, 50% humidity. Change altitude for where you hunt. Station pressure is calculated from altitude.

Get the impact-velocity requirement from the manufacturer for your exact hunting bullet. The catalog does not verify suitability for hunting. Leave this blank only if you intend to compare energy alone.

Species presets use the One Outdoors species chart. They are published recommendations, not universal or legal minimums. You can change any value.

These are recommended minimums, not guarantees. The hunter is responsible for selecting a suitable projectile, verifying its performance at the expected impact velocity, and deciding whether to follow these recommendations. Meeting a minimum does not establish an ethical shooting distance.

Your reference results

A comparison of chosen limits, not a shot recommendation.

Enter your load to see the calculated comparison.

The hunter is responsible for choosing the correct projectile and deciding whether to follow these recommended minimums. Bullet construction, placement, wind, and field conditions still matter.

Put this reference on your dial

Add hunting reference marks to a tape.

Enter this load in the builder, then turn on hunting reference marks and use the limits you checked here. One custom setup is $25.

Build Your Tape

Verify the whole setup.

This calculator does not check hunting regulations, bullet construction, expansion, penetration, or your ability to place a shot. Confirm your data and follow the rules where you hunt. Distance alone cannot tell you whether to shoot.

Browse the free tools or make a 4×6 drop chart.