Free trajectory tool

Maximum point-blank range.

Find the zero that keeps your trajectory inside your chosen target zone for the longest distance. A centered 6-inch zone allows ±3 inches.

Your rifle and target zone

Hold on the center with no dialing. Use the exact bullet's BC and your measured muzzle velocity.

Centered mode keeps equal room above and below the sight line. Offset mode shifts the full window only when sight height would put the muzzle below the centered window. It never changes modes automatically.

Conditions (optional)

Defaults: sea level, 65 F, 50% humidity. Station pressure is calculated from altitude.

Use the published G1 or G7 BC for your exact bullet. The drag model must match the BC. Sight height is the center-to-center distance from the bore to the optic.

Calculated envelope

Ranges are horizontal yards for a fixed center hold.

Your recommended near zero and maximum point-blank range will appear here.

What the result means

Centered mode places half the target diameter above the sight line and half below it. If the bullet begins below that window, the result shows the close-range distance where it first enters. Offset mode is an explicit alternative that can move the same total window down to include the muzzle. The calculator limits the highest modeled path to the selected upper boundary, then finds where the bullet later reaches the lower boundary. If the trajectory stays inside through 1,000 yards, the result is labeled as at least 1,000 yards instead of treating the limit as an exact crossing.

Need help checking BC, G1 versus G7, or sight height? Read the input guide.