Free printable target

Short-range zero target.

Print a target for the range you have and the zero you want, with separate aim and calculated impact marks.

Your setup

Use measured velocity and the BC type published for your bullet.

G1 and G7 coefficients are not interchangeable. Bullet weight is not needed for this trajectory calculation.

The intended zero must be farther than the short-range target.

Conditions

Defaults: sea level, 65 F, and 50% humidity. Station pressure is calculated from altitude.

Target result

Signed impact offset is relative to your line of sight.

Enter your setup to calculate the short-range impact point.

This is an initial zero only. Confirm at the intended distance before relying on it. A short-range group does not guarantee the intended-distance zero.

Print it at full scale.

Choose Actual Size or 100% and turn off Fit to Page. The printed one-inch scale check must measure exactly one inch. Aim at the black POA, then adjust until the center of the group lands on the red calculated POI.

Confirm the final zero with live fire at the intended distance and follow normal range safety procedures.